Xtool Upgrade Tool V2.0.57 |link| Page

Warning: Flashing a D1 Pro firmware onto a standard D1, or a 10W firmware onto a 20W module mistakenly, can disable your machine's safety features or damage components. Turn on your xTool laser machine.

For the xTool D1 Pro , some users have found that closing XCS completely before running the upgrade tool avoids “Access is denied” errors.

The upgrade tool was subjected to a validation protocol across the following operating systems and devices: xtool upgrade tool v2.0.57

⚠️ : Always download the tool from the official xTool support page or directly within XCS. Third-party sites may host outdated or malicious versions.

Before downloading and running the tool, ensure your workspace meets the following minimum specifications: Windows Requirement macOS Requirement Windows 10 or 11 (64-bit recommended) macOS 10.15 (Catalina) or higher Hardware Ports USB 2.0 or USB 3.0 Type-A Port USB-C or Type-A (Requires high-quality adapter) Internet Connection Required for initial firmware download Required for initial firmware download Driver Dependency CH340 USB-to-Serial Driver CH34x Driver (often built-in on newer macOS) Step-by-Step Guide: How to Use xTool Upgrade Tool v2.0.57 Warning: Flashing a D1 Pro firmware onto a

Double-check that the file name matches your exact hardware (e.g., D1 Pro vs D1). Open xTool Creative Space, connect to the machine, and perform a factory reset via the device settings menu to recalibrate the axis coordinates. Safety Best Practices for Firmware Updates

Click to pull the latest official firmware from the cloud. Step 4: Flash the Firmware Click the "Upgrade" button. The upgrade tool was subjected to a validation

on the VAG401 by re-installing the upgrade tool directly onto the device's SD card. Firmware & Software Updates:

Improved compatibility with Windows 10/11 and macOS architecture, ensuring the virtual COM ports (CH340/CH341 drivers) do not drop connections mid-update.

Reverts the tool to the previous version stored in the backup cache.