This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
[Power On Sensor] ──> [Ground the Chassis] ──> [Point to Clean Area & Press ZERO] ──> [Align LEDs at 25mm Target] ──> [Read / Capture Data] 1. Electrostatic Field Potential Measurement
Attach the fieldmeter's integrated grounding snap-cord directly to an ESD ground point. 2. Initializing & Re-Zeroing simco fmx002 manual top
Press the button. The digital display should read 0.00 .
until they converge into a single circle on the surface to ensure the correct measuring distance of Point the device at a known grounded (earthed) surface. Press the grey This public link is valid for 7 days
If a reading needs to be recorded, press the Hold button to freeze the display. Conclusion
If you need to record a fluctuating value, press the button to freeze the current reading on the screen. 3. Maintenance and Calibration To maintain "top" performance, the requires regular care: Can’t copy the link right now
approximately away from the surface you want to measure.
Uses integrated LED lights to identify the correct measuring distance (1" ± 1/64").
Moves right (red) for positive static charges; moves left (blue) for negative static charges.
Move the meter away from the target to comfortably read or record the data.
