Phison Mpall V5.13.0c Jun 2026

Initiates the transfer protocol between the computer and the chip.

files (Burner and Firmware) that match your controller from a technical repository like Step-by-Step Guide 1. Preparation

The actual operating system written to the controller chip.

The selected burner ( .BN ) file is incompatible with the physical arrangement of the NAND memory blocks on the circuit board. Phison Mpall V5.13.0c

Here’s what you should know:

Under the dropdown, select your exact Phison controller model (e.g., PS2251-07 ).

Phison MPALL V5.13.0c provides deep access to the flash drive’s architecture. Initiates the transfer protocol between the computer and

Run the diagnostic tool and look for the (must be Phison) and the Controller Part-Number (e.g., PS2251-07). Note down the Flash ID code and Firmware Version displayed. Step 2: Download the Matching Firmware Files MPALL requires two distinct binary files to flash a drive:

: Allows for advanced partitioning, such as creating a fixed disk partition, a CD-ROM emulation partition, or encrypted areas. Write Protection Removal

Identifying your USB drive's controller is the most critical step. You cannot and should not use MPALL on a drive with a non-Phison controller, as this can permanently damage the device. The selected burner (

Keep default configurations unless your hardware diagnostic specified a dual-channel controller.

is a "Mass Production" tool designed for advanced software-level repair and firmware flashing of USB flash drives equipped with Phison controllers. This specific version is a newer iteration used primarily to recover "dead" drives, remove write protection, or fix "No Media" errors. Key Features and Compatibility