: The GM160 utilizes an RJ45 microphone port connection on the front panel for data transfers. You can choose a classic RS-232 Serial (9-pin) cable or a modern USB-to-RJ45 programming cable.
Once you wrestle the GM160 into submission, you have a radio that will survive a drop off a truck, get covered in mud, and still work. The audio quality is legendary.
To use Motorola CPS, follow these steps: motorola gm160 programming software
Modify or add frequencies, bandwidths (12.5 kHz narrow or 25 kHz wide), and PL/DPL tones (CTCSS/DCS). Go to to map your preferred shortcut keys.
: If using a USB cable, install the correct Prolific or FTDI driver to emulate a COM port. : The GM160 utilizes an RJ45 microphone port
The GM160 programming software is powerful but archaic, finicky, and risky. Unless you already have a DOS PC, a RIB interface, and technical patience, pay a professional to program it. If you’re a retro-radio enthusiast, it’s a fun challenge – but expect frustration.
Before you begin programming, you must assemble the correct toolkit. Attempting to program the radio with mismatched hardware can result in connection errors or corrupted firmware. 1. The Right Software Version The audio quality is legendary
Open the CPS software and select the correct COM port under the "Setup" or "Communication" menu. Click the "Read Device"
If using a USB cable, ensure it features a high-quality chip (such as an authentic ) to prevent driver compatibility issues on modern operating systems like Windows 10 or 11. 3. Computer Setup