Enter the from the PPP Secrets section. MikroTik L2TP VPN Setup - Cloud Brigade
Ensure Proxy ARP is enabled on your bridge interface, or set up NAT for the VPN subnet. mikrotik l2tp server setup full
If you want to enable IPSec encryption for your L2TP connections, follow these steps: Enter the from the PPP Secrets section
Click and then OK .
Your MikroTik router likely features an active firewall blocking unauthorized incoming traffic. For L2TP and IPsec to establish connections successfully, you must open specific UDP ports on your WAN interface. Required Ports: L2TP traffic UDP Port 500: IPsec Internet Key Exchange (IKE) UDP Port 4500: IPsec NAT-Traversal (NAT-T) mikrotik l2tp server setup full
/ip ipsec peer add address=0.0.0.0/0 profile=vpn-profile exchange-mode=main-l2tp send-initial-contact=yes