Hofmann Duolift Gte 2500 Manual Jun 2026

To lower the vehicle, the safety locks must be released manually (or automatically, depending on the specific model sub-type). 5. Maintenance Guidelines (Long-Term Reliability)

Ensure a qualified electrician connects the main power supply (typically 3-phase 400V). 4. Operating Instructions Pre-Check Checklist Inspect lifting pads for cracks or severe wear. Verify the synchronization cables are taut. Check that safety locks engage with audible clicks. Lifting a Vehicle Position the vehicle centrally between the two columns. Swing the lifting arms under the vehicle chassis.

Such as the chain fracture switch and limit switches. Automotive lifts - Autosfera.lt

2,500 kg with an admissible load distribution (front/rear) of 2:3 or 3:2. hofmann duolift gte 2500 manual

Before operating the lift, technicians should be trained on the specific controls of the Hofmann Duolift GTE 2500.

Only lift vehicles at the manufacturer-recommended pick-up points using all four support pads. Safety Features:

Regular servicing extends the lifespan of the load nuts and drive spindles. Weekly Tasks Clean dirt and metal shavings from the drive spindles. To lower the vehicle, the safety locks must

is a highly durable, electromechanical two-post automotive lift. It is engineered specifically for independent repair shops and tire service centers. It features a robust single-motor drive, low-wear Nylatron load nuts, and a low-profile base frame. Managing this equipment requires access to technical specifications and structured operating procedures.

Single electric motor (3 kW) via ultra-durable floor roller chain 3/PE AC 50 Hz, 380–415 V (Three-phase power) Max Lift Travel / Height 1,965 mm total elevation profile Lifting / Lowering Time ~45 seconds to full height Overall Structural Width Drive-Through Clearance 2,560 mm clear vehicle passage width Column Total Height Minimum Pick-up Height Adjustable pads: 105–165 mm; Fixed pads: 95 mm Total Unladen Weight Approximately 680 kg 🏗️ Installation & Foundation Guide

Electronic or mechanical cable monitoring (model dependent) Check that safety locks engage with audible clicks

Clean the safety switch mechanism at the top of the column and check wiring connections.

If you need further help with your , please share: The exact model year or serial number from the column plate

Hofmann Duolift GTE 2500 is a professional-grade electro-mechanical two-post lift designed for passenger cars and small vans. This lift is characterized by its base frame construction and synchronisation via a chain drive Autosfera.lt Technical Specifications Rated Load Capacity: 2,500 kg (approx. 5,512 lbs). Admissible Load Distribution: Front/Rear 2:3 or 3:2. Lifting/Lowering Time: Approximately 45 seconds. Max Lifting Height: Pick-up Height: Vertically adjustable pads: 105 – 165 mm. Stationary pads: 95 mm. Power Supply: 3/PE AC 50 Hz 380-415 V. Autosfera.lt Installation Guidelines Foundation Requirements: Must be installed on a concrete slab of at least C20/25 quality (B25). Recommended minimum dimensions are 3700 mm x 1400 mm x 150 mm Anchoring:

The Hofmann DuoLift GTE 2500 represents an era of robust, dependable workshop equipment. While age and the difficulty of finding official documentation present challenges, the knowledge contained within its technical manuals is the single most important asset for an owner. Following the guidelines for proper installation, regular maintenance, and safe operation is non-negotiable for ensuring the safety of everyone in the workshop.

Ensure the lifting pads are clean, free of grease, and have intact rubber surfaces.