The drivers for this series act as the bridge between your operating system and the hardware, enabling "High Speed Driver Mode" for rapid output. Compatibility:
: Features an integrated automatic cutter mechanism that executes partial or full cuts after a print job concludes.
The installer will usually auto-detect your Windows version. Confirm it is correct. Select Printer Interface:
: Strict default processing parameters optimized for standard 80mm (3.15 inches) thermal receipt paper rolls. gp-80160 n-cut- series driver
Windows has lost track of the specific USB port assignment, often caused by plugging the USB cable into a different port than the one used during initial installation.
Reaches speeds of up to 160mm/sec , keeping your lines moving.
Check "Printing Preferences" and ensure the cutter option is enabled. If using custom POS software, ensure the software is set to use the "Windows Driver" rather than sending raw text commands. Issue 3: Printer Status Shows "Offline" The drivers for this series act as the
The GP-80160 series is designed for retail and hospitality environments. GP-80160 Cut Series Printer Overview | PDF - Scribd
Pro Tip: Always use twisted-pair shielded cable for Step/Dir signals. Connect the shield to Earth ground only at the controller end to avoid ground loops.
Applicable to all 80 series models, models: GP-80160N(No Cut)、GP-80160N(Cut)、GP-80220(No Cut)、GP-80220(Cut)、GP-80250、GP-80250N、GP- 易标签软件 GPRINTER GP-80160 Installation Manual - ManualsLib Confirm it is correct
First, verify that the cutter works mechanically by performing a hardware self-test (hold the FEED button while turning the printer on). If it cuts during the self-test, the issue is software-based. Go to Printer Properties > Device Settings and ensure "Cut Paper" commands are enabled for "End of Document." If using specialized POS software, check the software's internal hardware settings menu to ensure "Send Cut Command" is toggled on. Conclusion
The GP-80160 is a standard ESC/POS thermal printer. While it has a specific driver, it is highly compatible with industry standards. If you cannot find the specific GP-80160 driver, it generally works perfectly with the driver or even the EPSON TM-T88V driver (generic emulation).