Gordak 952 | User Manual Updated Fix

Ensure the 3-prong plug is connected to a grounded outlet.

Adjust the TEMP knob for the air gun to the desired setting.

If you need to change any parts, look for and A1130 style heating elements , which are widely available online. Always unplug the unit from the wall outlet before opening the casing or replacing parts. gordak 952 user manual updated

The ceramic insulation rings inside both the iron and the air gun are fragile and can crack upon impact.

Adjust the to a medium setting (4 or 5). Never operate the heater with the air volume set to zero, as this will instantly burn out the heating element. Ensure the 3-prong plug is connected to a grounded outlet

The Gordak 952 is a dual-function SMD hot air rework station and soldering iron. It is a staple tool for electronics repair technicians, hobbyists, and engineers. This updated manual provides comprehensive operating procedures, safety protocols, and troubleshooting steps. 📦 Unboxing and Initial Setup

Controls pump speed, regulating the volume of airflow from 0.3 to 24 liters per minute. Always unplug the unit from the wall outlet

: Ensure your power outlet matches the unit's requirements (typically 220V AC). 3. Operating Instructions Using the Hot Air Gun GORDAK 958D Digital Display Hot Air Gun Soldering Station

, follow these critical safety guidelines provided in the Gordak 952 User Manual :

When you finish using the hot air gun, turn off its power switch.