Switches between time, date, and temperature; also used to enter setting modes. Checks alarm status and enters alarm setup. SNZ/LIGHT:
Press the button once to switch to Date mode (it will display a date like 101 or 1:01).
The clock will prompt you to choose the time format. Use or DOWN to select 12Hr (AM/PM) or 24Hr mode. Press MODE to confirm. dt6507 led mirror clock instructions
The DT6507 can be powered in two ways, with vastly different behaviors:
An (usually a small bell or dot) will appear on the screen when the alarm is active. Handling a Ringing Alarm Switches between time, date, and temperature; also used
Your clock is running on battery power. The DT6507 turns off the screen to save battery life. Plug it into a USB outlet for a permanently lit screen.
Press the button repeatedly to cycle through the three available brightness levels: Bright, Medium, and Low . Night Mode (Auto-Dimming) The clock will prompt you to choose the time format
| Issue | Likely Fix | |-------|-------------| | No display | Check power adapter connection. Try USB power if supported. | | Wrong time after power off | Replace backup batteries. | | Remote not working | Replace remote battery (CR2025). Clean mirror surface – IR may need a clear path. | | Dim or flickering digits | Adjust brightness; check for loose power plug. |
: