Cencom Gold Wiring Diagram !!better!! Now
When wiring the CenCom Gold system from scratch, follow this logical sequence to ensure safety and system integrity: Step 1: Route the Control Cable
Which (e.g., Whelen Liberty, Legacy, Freedom) are you pairing with the system?
These are designed for smaller LED perimeter lights, grille lights, or triggers for secondary relays. Often rated around 2 Amps per line.
The CenCom Gold system is centralized around the ARM, which houses all external fuses and primary connections. cencom gold wiring diagram
: Map these to specific light heads (Grille, Lightbar, Intersection) and ensure the wattage does not exceed the 10-amp or 20-amp limit per output wire. Visual Inspiration for Circuitry
Unlike standard phone-style cables, the Gold uses a heavy-duty 22-gauge, 8-conductor cable to link the head to the ARM.
Connects to the ARM via a single 8-conductor, 22-gauge cable. Outputs: The module features multiple fused outputs: Slide Switch: One 40-amp and two 20-amp outputs. When wiring the CenCom Gold system from scratch,
Always use the recommended wire gauge (typically 12–14 AWG for 20A loads) to prevent voltage drops and heat buildup. 2. Low-Current / Input Connections
+------------------+ Data Link Cable +--------------------------+ | Control Head |========================>| Amplifier / Relay Module | | (Dash Mounted) | (8-Conductor, 22g) | (ARM) | +------------------+ +--------------------------+ | | | | | | +-------------------------------------+ | | | | +--------------------+ | | | | | +-----------------+ | V V V V V V V +---------+ +---------+ +---------+ +--------+ +-------+ +--------+ | Main B+ | | Ground | | Ignition| | Light- | | Siren | | Radio | | (2x40A) | | Lines | | Sense | | heads | | Spkrs | | Re-out | +---------+ +---------+ +---------+ +--------+ +-------+ +--------+
Ensure the CenCom module chassis is grounded and that the control head data cable is not bundled alongside the police radio antenna coax cable. The CenCom Gold system is centralized around the
A: While CenCom Gold was introduced before WeCanX, it generally supports traditional lightheads and older WeCan systems. Newer systems like Carbide are designed for WeCanX.
What is the of the vehicle you are upfitting?
Modern emergency vehicles are sensitive to electrical noise; always ensure a clean, bare-metal ground for your 10 AWG black wires. Software Matters:
The following specifications are standard for the CenCom Gold: : Uses a heavy-duty 2-position Molex connector .
Tied to the vehicle horn ring. Tapping the horn cycles through siren tones when the system is armed. ⚡ Step-by-Step Installation Best Practices