Install !!install!!: 3500050101010000

All field wiring should be done to the terminals on the rear I/O modules.

The long string of digits represents a specific build-to-order configuration: : The base model for the system rack. : Typically indicates a standard 19-inch EIA rack-mount : Refers to the capacity, allowing for a high density of monitoring cards. : Often designates the internal termination type for wiring connections.

:

:

Install the RIM (e.g., 3500/20) into the slot next to the power supplies. The RIM communicates between the 3500 modules and external software (like System 1). C. I/O Module Installation 3500050101010000 install

: The rack is designed for standard 19-inch rack mounting. Use the provided paper template to mark and drill holes if you are performing a bulkhead or panel mount.

Alex spun around in his chair.

Use standard screws to fasten the 3500 rack to the cabinet front rail. 2.2 Panel Mount

: Installs into a cutout in a cabinet door or panel. Bulkhead Mount : Fastens directly to a wall or flat surface. All field wiring should be done to the

: These suffixes usually represent the absence of specialized options, such as specific agency approvals (e.g., ATEX/IECEx) or European certifications, indicating a standard industrial build. Installation and Operational Role

Last updated: October 2025. This guide supersedes all previous versions. : Often designates the internal termination type for